#UPDATE_ID=1234567890112233445566778899
#home_head_foot
login_title=כניסה לממשק הניהול של נטסטיק MF79K
default_password_desc=סיסמת ברירת המחדל היא 12345678
netstick_desc=נטסטיק MF79K מיועד לשימוש עם סים נטפרי - יוסי תקשורת בלבד
active_connection_status = חיבור פעיל
disconnected_connection_status = מנותק
connecting_connection_status = מתחבר
disconnection_connection_status = מתנתק
connected_device_count = מכשירים מחוברים:
update_download_speed = מהירות העלאה והורדה:
network_type_label = גולש על
network_operator_label = שם המפעיל: 
signal_info_label = איכות קליטה
network_signal_label = איכות הקליטה הסלולרית
internet_settings = הגדרות רשת
wifi_settings = הגדרות Wifi
device_imei = המספר הסידורי של המכשיר (IMEI):
logout_management = התנתקות מממשק הניהול של הנטסטיק
modify_password_management = שינוי סיסמת הכניסה לממשק הניהול
modify_wifi_management = שינוי סיסמת החיבור האלחוטי (ווייפיי)
wifi_on_off = <b>ווייפיי דולק/כבוי</b><br>באפשרותכם לאפשר או לכבות את החיבור האלחוטי לנטסטיק
wifi_connect_message = האם ברצונך להפעיל את הווייפיי?
wifi_disconnect_message = האם ברצונך לכבות את הווייפיי?
simcard_info_title=שים לב

simcard_block_label=לקוח יקר! זוהתה גלישה ממקור לא ידוע
simcard_block_message=כדי להבטיח גלישה מסוננת וכשרה הגלישה נחסמה
נטסטיק זה פועל עם סים נטפרי - יוסי תקשורת בלבד
simcard_invalid_label=שים לב!
simcard_invalid_message=לא הוכנס סים


pc_version = PC
mobile_version = Mobile
copyright = Copyright &copy; 1998-2019 ZTE Corporation. All rights reserved
home_image_wording1 =  Access Device
home_image_wording2 =  My router
home_image_wording3 =  Net surfing
modify_password = Modify Login Password
shutdown = Shutdown
shutdown_note_info = You can shutdown the device from this setting
shutdown_confirm = The device will be shutdown. Continue?
detail_info = Detail Information
sd_u_share = SD Sharing
device_unit = &nbsp;
ssid_title = SSID

traffic_data_plan = Statistics
traffic_pie_title = Data Plan
traffic_sub_title = You can create statistic plan, query used and left statistic
traffic_used = Used
traffic_used_text = {0} Used
traffic_limit_data = Data Plan
traffic_limit_data_text = {0} Data Plan
traffic_alert_reach_text = When reached {0}%, {1} to remind me
traffic_data_left_text = {0} of remaining
traffic_when = When reached
traffic_remind_me = %, to remind me
traffic_remind_me_time = , to remind me
traffic_limit_time_text = {0} Hour(s) Time Plan
traffic_not_set_limited = Not set,<br>click Settings
used_time_unit_1= Minutes
used_time_unit_60= Hours
connection_button_info=כיבוי או הדלקה של הנטסטיק<br>(וודאו שהכפתור פעיל כדי שתוכלו לגלוש)
ver_num=מספר גירסה:
current_version=1.93
###

#title
home = Home
sms = קבלת SMS
sd = SD Card
setting = הגדרות
status = Information
net_select_button = <b>מצב הרשת</b><br>בחרו בין דור 3 לדור 4 (דור 4 מהיר יותר)
net_select = בחירת רשת
dial_setting = Dial-up Settings
apn_setting = APN
wifi_advance = Advanced Settings
management = Management
net_setting = Connection Settings
quick_setting = Quick Settings

device_info = Status Information
traffic_statistics = Statistics
traffic_alert = Data Management

wifi = Wi-Fi
wifi_basic = Basic Settings
device_setting = Device Settings
sim = SIM Card
device = Device
router_setting = Router
advanced_settings = Advanced Settings
others = Others
wps = WPS
sleep_mode = Power-save
lan = LAN
wifi_wireless_settings = הגדרות הרשת האלחוטית

firewall = Firewall
system_security = System Security
port_forward = Port Forwarding
port_filter = Port Filtering

display_password = הצג סיסמה
###

#status_bar
network_status = Network Status
connection_status = Connection status
battery = Battery
charging = Charging
sim_status = SIM Status
sim_status_modem_waitpin = Invalid SIM card
sim_status_modem_waitpuk = Invalid SIM card
sim_status_modem_sim_undetected = Invalid SIM card
sim_status_modem_undetected = Invalid SIM card
sim_status_modem_imsi_waitnck = Invalid SIM card
sim_status_modem_sim_destroy = Invalid SIM card
sim_status_modem_destroy = Invalid SIM card
sim_status_modem_init_complete = Valid SIM card
sim_status_modem_ready = SIM is ready
wifi_status = Wi-Fi Status
wifi_status_on = Wi-Fi on
wifi_status_off = Wi-Fi off
wifi_num =  Number of users:
enable_pin = Enable PIN
remaining_time = Remaining Time
signal = Signal
network_type = Network type
network_type_limited_service = Limited Service
network_type_no_service = No Service
network_provider = Operator
roaming_status = Roaming status
sim_status_ready = SIM is ready
sim_status_waitpin = Ready to input PIN
sim_status_waitpuk = Ready to input PUK
sim_status_undetected = No SIM card detected
sim_status_waitnck = Ready to input NCK
sim_status_destroy = SIM is corrupted
signal_strength = Signal strength
signal_strength_label = Signal Strength
battery_level = Battery level
wifi_5g_enalbe_alert = Open 5GHz failure, Do you want to set to 2.4GHz?
###

#validate
phonenumbers_check = Input 5 phone numbers at most, and separate them by '';''
required = נדרש
remote = Please fix this field
dateISO = Please input a valid date (ISO)
number = Please input a valid digit
digits = Please input integer only
any_digits = Please input integer only
creditcard = Please input a valid credit card number
equalTo = Please input the same value again
accept = Please input a value with a valid extension
maxlength = Please input no more than {0} characters
minlength = נא הזינו לפחות {0} תווים
rangelength = Please input a value between {0} and {1} characters in length
range = Please input a value between {0} and {1}
max = Please input a value less than or equal to {0}
min = Please input a value greater than or equal to {0}
ssid = נא הזינו ספרות או אותיות באנגלית
ap_ssid  = Please input a valid SSID
email_check = Please input a valid email
ipv4 = Please input a valid IP address
ipv6 = Please enter a valid IPv6 address
name_check = Please input a valid name
phonenumber_check = Please input a valid phone number
sms_service_center_check = Please enter a valid center number
pin_check = Please input 4 to 8 digits
puk_check = Please input 8 digits.
password_check = נא הזינו סיסמה תקפה.
subnetmask_check = Invalid subnet mask
dhcp_check = DHCP {0} IP is not in the range of LAN subnet
start = start
end = end
dhcpCompare = Invalid IP address. Start IP shouldn't be greater than end IP
ipRange = IP pool can't contain LAN IP address (DHCP start IP should be greater than LAN IP address)
lanip_check = Please input a valid IP address
ip_broadcast_check = Please input a valid IP address
ip_broadcast_range_check = Please input a valid IP address
ip_check = Please input a valid IP address
dmz_ip_check = Please input a valid IP address
wps_pin_check = Invalid PIN number
wps_pin_length_check = Please enter 4 or 8 digits
browse_sdcard = View SD card
portCompare = Invalid port range
comment_check = Invalid character
check_file_path = The folder name contains invalid characters
apn_check = Please input a valid APN
ppp_username_check = Please input a valid username
ppp_password_check = נא הזינו סיסמה המורכבת מספרות או מאותיות באנגלית בלבד
unlock_code_check =  Please input a valid unlock code. The code must be 0-9, a-f or A-F, and its length must be 16 characters.
apn_profile_name_check = The APN profile name contains invalid characters
dlna_name_check = The Device Name must be 0-9, a-z, A-Z or _
login_password_required = Please input a password
wifi_password_check = נא הזינו סיסמה המורכבת מספרות או מאותיות באנגלית בלבד
wifi_wep_password_check = Please input 5 or 13 ASCII characters or input 10 or 26 Hex characters.
range_except = Input a value between {0} and {1}, except for that between 32000 and 32007

#common
settings = הגדרות
enable = הפעל
disable = השבת
apply = אישור
cancel = ביטול
clear = ניקוי
reset = איפוס
add = הוספה
add_new = הוסף חדש
save = שמור
new = חדש
view = הצג
select = בחר
edit = ערוך
delete = מחק
delete_all = מחק הכל
success_info = הצליח
error_info = נכשל
connect = התחבר
disconnect = התנתק
connected = מחובר
disconnected = מנותק
connecting = מתחבר…
disconnecting = מתנתק…
confirm = אישור
prompt = שימו לב
prompts = שימו לב
info = מידע
alert = התראה
yes = כן
no = לא
ok = אישור
back = חזור
exit = יציאה
next_step = הבא
prev_step = הקודם
next_page = &gt;&gt;
prev_page = &lt;&lt;
root = Root
create = צור
speed = מהירות
upload = העלאה
download = הורדה
uploaded = הועלה
downloaded = הורד
on = דולק
off = כבוי
need_login_again = התנתקתם מהמערכת. נא התחברו שוב. 
modify = שנה
content = התחבר
time = זמן
processing = מעבד...
saving = שומר...
deleting = מוחק...
scanning = סורק...
scan = סרוק
sending = שולח...
creating = יוצר...
uploading = מעלה...
waiting = ממתין...
leave_page_info = You have unsaved changes. Are you sure you want to continue?
colon = :
page = Page:
go = GO
ALL = ALL
open_source_licenses = Open Source Licenses
vertical_bar = |
3g = 3G
wan = WAN

connected_cannot_modify = השינויים יחולו רק במידה והנטסטיק כבוי. <br/>חזרו לתפריט הראשי, כבו את הנטסטיק בצד ימין למעלה וחזרו לכאן לבצע את השינויים. אל תשכחו להדליק אותו בחזרה לאחר השינויים! 
###

#login
password = סיסמה
puk = PUK
login = התחבר
logout = התנתק
new_pin = קוד PIN חדש
confirm_pin = אשר את קוד ה-PIN
puk_locked = Your SIM card is locked permanently. Please contact your operator.
password_error = הסיסמה אינה נכונה
password_error_left = הסיסמה אינה נכונה<br/>יש לך {0} נסיונות נוספים.
password_error_account_lock = החשבון שלך חסון <br/>הזמן שנותר:
password_error_five_times = You''ve input 5 times incorrectly. Retry in 5 minutes.
password_error_account_lock_time = Your account is locked. <br/>Please try later.
enter_pin = SIM card is locked, please input PIN to unlock.
enter_puk = SIM card is PIN-locked, please input PUK to unlock.
last_enter_pin = Final attempt. If incorrect again, your SIM card will be locked!
last_enter_puk = Final attempt. If incorrect again, your SIM card will be corrupted!
attempts_left = Attempts Left:
pin_error = PIN is incorrect!
puk_error = PUK is incorrect!
confirm_logout = אתה עומד להתנתק, האם הנך בטוח?
lcd_loginfo = You cannot login because of the device operated. Please turn off the device from home screen. Then you can login WEB UI.

###

#login_nosimcard
no_sim_card_title = מידע מערכת
no_sim_card_message = לא הוכנס סים

#login_network_locked
network_locked = הרשת נעולה!
network_locked_explain = This device is network locked. Please contact your service provider to get unlock code.
network_locked_times_explain =  Attempts left for unlock code input:
network_locked_enter_explain = Please input unlock code:
network_locked_zero_times = This device is network locked. Please contact your service provider.

#SMS
smslist = הודעות SMS
sms_setting = הגדרות SMS
sim_messages = SIM SMS
refresh = רענן
forward = העבר
draft = טיוטה
send_fail_try_again = השליחה נכשלה.
sms_content_required = אנא הקלד הודעת SMS.
sms_contact_required = אנא בחר איש קשר.
select_some_options = יש אפשרות לבחור עד 5 אנשי קשר
select_an_option = בחר אפשרות
chat_input_placehoder = הקלד הודעה כאן
sms_chat_input_confirm = Please press Enter or enter ";" to complete
sms_capacity_will_full = SMS capacity will be full, please delete some SMS
sms_capacity_is_full = SMS capacity is full, please delete some SMS
sms_capacity_is_full_for_send = SMS capacity is full, please delete some SMS to receive or send message.
sms_capacity_will_full_just = SMS capacity will be full, you could send {0} SMS(s)
sms_capacity_will_full_just_draft = SMS capacity will be full, you could save {0} SMS(s)
sms_init_fail = SMS failed to initialize!<br/>Please check SIM card and restart the device.
sms_resending = שולח שוב SMS...
sms_resend_fail = שליחה חוזרת נכשלה.
sms_stop_sending = Stop Sending
sms_unread_count = Unread SMS
sms_delivery_report_1 = SMS is delivered.
sms_delivery_report_2 = SMS is undelivered.
sms_delivery_report_3 = Sending SMS...
sms_report = Delivery Report
sms_cancel_sending = Cancelling...
sms_save_draft_success = SMS is saved as a draft
sms_save_draft_failed = שמירת טיוטה נכשלה
sms_to_save_draft = SMS was modified, save it as a draft?
sms_no_recipient = Your SMS doesn''t have any recipients, and this SMS will be discarded.
phone_number_invalid = מספר הטלפון אינו תקין
sms_to = אל:
confirm_sms_delete = מחק הודעות שנבחרו?
phone_number = מספר
###

#sms_setting
sms_validity = Validity
sms_validity_twelve_hours = 12 Hours
sms_validity_one_day = 1 Day
sms_validity_one_week = 1 Week
sms_validity_largest = Maximum
center_number = Center Number
delivery_report = Delivery Report

sms_setting_note_validity = Validity: Set valid period of outgoing messages.
sms_setting_note_center_number = Center Number: Enter SMS center number. For more information, please contact your service provider.
sms_setting_note_delivery_report = Delivery Report: Receive or reject a prompt informing you that the message is delivered to the recipient.
###

#phonebook
phonebook = ספר טלפונים
search = חיפוש
save_location = שמור מיקום
save_location_0 = כרטיס SIM
save_location_1 = מכשיר
group_all = הכל
group_null = -
group_common = כללי
group_family = משפחה
group_friend =  חברים
group_colleague = עמיתים
name = שם
mobile_phone_number = נייד
home_phone_number = נייח
office_phone_number = משרד
mail = דואר אלקטרוני
group = קבוצה
no_data_selected = אנא בחר רשומה!
confirm_data_delete = האם אתה בטוח שברצונך למחוק?
confirm_pb_delete = מחק אנשי קשר שנבחרו?
too_many_data_selected = נבחרו מידי הרבה מספרים, אנא בחר מספר אחד!
delete_fail_try_again = המחיקה נכשלה, אנא נסה שנית.
max_send_number = You can enter 5 phone numbers at most!
send = שלח
send_sms = שלח הודעה
new_message = הודעת SMS חדשה
send_numbers = מספר
contents = תוכן
device_full =  Phonebook space on your device is full!
sim_full = כרטיס הסים מלא!
phonebook_init_fail = The phone book failed to initialize!<br/>Please check SIM card and restart the device.
sim_removed = SIM card was removed!
change_device_to_sim_confirm = Information may be lost, and whether there is a need to continue to deposit?
###

#traffic
ap_station_clear = Clear all
current_flux = Current Data
total_flux = Total Used Data
connected_time = Duration
flux_up = Upload
flux_down = Download
traffic_clear = Traffic Clear
traffic_clear_date = Clear Date
traffic_current_connection = Current Connection
traffic_current_month_data = Current Month
traffic_total_traffic = Total Used Data
traffic_used_data_month = Data usage of this month:
traffic_used_time_month = The online time of this month:
traffic_data_approximated = Data usage is approximate only. For actual usage, please refer to your network operator.
traffic_used_month = Used:
traffic_left_month = Left:
traffic_exceeded_month = Exceeded:
traffic_total_month = Limit:
traffic_apply_volume_limit = Data Management
traffic_data_limit_type = Data Type
traffic_data = Data
traffic_time = Time
traffic_limit_data_month = Monthly
traffic_alert_when_data_reach = Remind me
traffic_limit_time_month = Monthly
traffic_alert_when_time_reach = Remind me
traffic_million_byte = MB
traffic_percent = %
traffic_limit_disconnect_msg = Your data/time used reaches {0} percent. Do you want to disconnect from network?
traffic_limit_connect_msg = Your data/time used reaches {0} percent. Do you still want to connect to network?
traffic_limit_msg = Your data/time used reaches {0} percent.
traffic_beyond_disconnect_msg = Your data/time used exceeds limit. Do you want to disconnect from network?
traffic_beyond_connect_msg = Your data/time used exceeds limit. Do you still want to connect to network?
traffic_beyond_msg = Your data/time used exceeds limit.
traffic_calibrate_note = Support data calibrate function. If the data that web page displayed is not in agreement with the actual used, you can modify the used data by this operation.
traffic_note = Remind me when used data/time reaches specified percentage.
traffic_clear_confirm = Are you sure to clear?
traffic_not_support = The current mode does not support this feature.
range_data_usage = Please input a positive number between 0~10000 for valid data usage
range_data_usage2 = Please input a positive number between 1~10000 for a valid data usage
point_data_usage =  Please input a positive number, with a maximum of two decimal places.
###


#Device Information
max_access_num = Max Access Number
lan_domain = LAN Domain
sim_serial_number = SIM Card Number
software_version = Software Version
firmware_version = Firmware Version
hardware_version = Hardware Version
imei = IMEI
imsi = IMSI
wan_ip_address = WAN IP Address
ipv6_wan_ip_address = WAN IPv6 Address
network_name_ssid1 = Network Name (Main SSID)
pass_phrase_ssid1 = Pass Phrase (Main SSID)
max_access_num_ssid1 = Max Access Number (Main SSID)
network_name_ssid2 = Network Name (Guest SSID)
pass_phrase_ssid2 = Pass Phrase (Guest SSID)
max_access_num_ssid2 = Max Access Number (Guest SSID)
###

#network_dial_setting
dial_note = WAN Connection Status
dial_mode = Connection Mode
dial_mode_cpe = Dial-up Mode
dial_roam_info = The Roaming Setting is disabled. To enable it, please go to setting page and click in the checkbox.
dial_setting_note_automatic = Automatic: The device will automatically connect to network when it is powered on.
dial_setting_note_manual = Manual: The device will connect to network manually.
dial_roaming_remind = Check here, you can connect to internet in the roaming status. (Warning: Connecting while roaming may occur additional charges)
dial_roaming_connect = Your device is roaming. Connecting to network may occur additional charges. Continue?
###

#network_net_select
auto_select = אוטומטי
manual_select = Manual
auto_select_type_WCDMA_preferred = אוטומטי
auto_select_type_LTE_preferred = אוטומטי
auto_select_type_NETWORK_auto = אוטומטי
auto_select_type_Only_LTE = דור 4 בלבד
auto_select_type_WCDMA_AND_LTE = דור 3/4 בלבד
auto_select_type_Only_WCDMA = דור 3 בלבד
auto_select_type_Only_GSM = דור 2 בלבד


searching_net = Searching, please wait...
registering_net = Registering, please wait...
network_list = Network List
register = Register
auto = Auto
unknown = Unknown
available = Available
current = Current
forbidden = Forbidden
net_select_note_automatic = Automatic: The device will search available network automatically.
net_select_note_manual = Manual: The device will search available network manually.
net_status = Status
mccmnc = MCCMNC
option = Option
networktype = Network Type
current_network = Current Network
###

#network_apn
apn_currentApn = Current APN
apn_mode = Mode
apn_auto_apn = Auto
apn_manual_apn = Manual
apn_profile = Profile
apn_profile_name = Profile Name
apn = APN
apn_ipv4_apn = IPv4 APN
apn_ipv6_apn = IPv6 APN
apn_dns_mode = DNS Mode
apn_dns_mode_ipv4 = IPv4 DNS Mode
apn_dns_mode_ipv6 = IPv6 DNS Mode
apn_auto_dns = Auto
apn_manual_dns = Manual
apn_dns1 = DNS 1
apn_dns2 = DNS 2
apn_dns1_ipv4 = IPv4 DNS 1
apn_dns2_ipv4 = IPv4 DNS 2
apn_dns1_ipv6 = IPv6 DNS 1
apn_dns2_ipv6 = IPv6 DNS 2
apn_authentication = Authentication
apn_authentication_ipv4 = IPv4 Authentication
apn_authentication_ipv6 = IPv6 Authentication
apn_user_name = User Name
apn_user_name_ipv4 = IPv4 User Name
apn_user_name_ipv6 = IPv6 User Name
apn_password = Password
apn_password_ipv4 = IPv4 Password
apn_password_ipv6 = IPv6 Password
apn_pdp_type = PDP Type
set_default = Set as default
apn_save_profile_exist = Profile Name already exists, please select another name.
apn_delete_cant_delete_default = You can''t delete the default profile!
apn_delete_confirm = Are you sure to delete?
apn_cant_modify_status = Can''t change the current APN setting when the network is {0}!
apn_cant_modify_current = You can''t change the APN that is in use!
apn_cant_delete_current = You can''t delete the current profile!
apn_profile_full = You can only add {0} items at most!
apn_pdptype_change_note = If the setting is changed,you may have a risk not to visit the Webpage by {0}. Then please try {1} to visit.
disconnected_network_confirm = This operation will disconnect from network, would you like to continue?

###

#wifi_basic_advance
wifi_main_sub_title = באפשרותך לשנות את שם הרשת האלחוטית והסיסמה
wifi_broadcast_desc = Broadcast SSID
wifi_isolated_desc = All the wireless client device is completely isolated
multi_ssid_enable = Multi SSID Switch
multi_ssid_1 = Main SSID
multi_ssid_2 = Guest SSID
multi_ssid_enable_confirm = If enable multi-SSID, Internet Wi-Fi will be disabled. Continue?
multi_ssid_max_access_number_alert = The combined max access number of Main SSID and Guest SSID can''t be more than {0}!
network_band_selection = Band Selection 
network_mode= Network Mode
network_name= שם הרשת
broadcast_network_name=Broadcast Network Name (SSID)
country_region_code = Country/Region Code
frequency_channel = Frequency (Channel)
rate = Rate
max_station_number = Max Station Number
wifi_basic_note = כל החיבורים הפעילים יצטרכו להתחבר מחדש. האם הנך מאשר?
wifi_disconnect_confirm = כל החיבורים הפעילים יצטרכו להתחבר מחדש<br>האם הנך מאשר?
network_mode_2 = 802.11 n only
network_mode_4 = 802.11 b/g/n
network_mode_5 = 802.11 a only
frequency_channel_0 = Auto
frequency_channel_1 = (Channel 1)
frequency_channel_2 = (Channel 2)
frequency_channel_3 = (Channel 3)
frequency_channel_4 = (Channel 4)
frequency_channel_5 = (Channel 5)
frequency_channel_6 = (Channel 6)
frequency_channel_7 = (Channel 7)
frequency_channel_8 = (Channel 8)
frequency_channel_9 = (Channel 9)
frequency_channel_10 = (Channel 10)
frequency_channel_11 = (Channel 11)
frequency_channel_12 = (Channel 12)
frequency_channel_13 = (Channel 13)
frequency_channel_14 = (Channel 14)
frequency_channel_15 = (Channel 15)
frequency_channel_16 = (Channel 16)
frequency_channel_17 = (Channel 17)
frequency_channel_18 = (Channel 18)
frequency_channel_19 = (Channel 19)
frequency_channel_20 = (Channel 20)
frequency_channel_21 = (Channel 21)
frequency_channel_22 = (Channel 22)
frequency_channel_23 = (Channel 23)
frequency_channel_24 = (Channel 24)
frequency_channel_25 = (Channel 25)
frequency_channel_26 = (Channel 26)
frequency_channel_36 = (Channel 36)
frequency_channel_40 = (Channel 40)
frequency_channel_44 = (Channel 44)
frequency_channel_48 = (Channel 48)
frequency_channel_149 = (Channel 149)
frequency_channel_153 = (Channel 153)
frequency_channel_157 = (Channel 157)
frequency_channel_161 = (Channel 161)
frequency_channel_165 = (Channel 165)
rate_0 = Auto
rate_1 = 1 Mbps
rate_2 = 2 Mbps
rate_3 = 5.5 Mbps
rate_4 = 6 Mbps
rate_5 = 6.5 Mbps
rate_6 = 9 Mbps
rate_7 = 11 Mbps
rate_8 = 12 Mbps
rate_9 = 13 Mbps
rate_10 = 18 Mbps
rate_11 = 19.5 Mbps
rate_12 = 24 Mbps
rate_13 = 26 Mbps
rate_14 = 36 Mbps
rate_15 = 39 Mbps
rate_16 = 48 Mbps
rate_17 = 52 Mbps
rate_18 = 54 Mbps
rate_19 = 58.5 Mbps
rate_20 = 65 Mbps
cannot_operate_when_wifi_connected = You can''t operate when Wi-Fi is connected!
network_mode_select_2 = 802.11 n only
network_mode_select_4 = 802.11 b/g/n
network_modes_band_select_2 = 802.11 n only
network_modes_band_select_4 = 802.11 a/n
network_modes_band_select_5 = 802.11 a only
network_modes_band_select_6 = 802.11 a/n/ac
wifi_channel_bandwidth = Channel Bandwidth
security_policy = Security Policy
security_mode = Security Mode
security_mode_OPEN = OPEN
security_mode_WPA2PSK = WPA2(AES)-PSK
security_mode_WPAPSKWPA2PSK = WPA-PSK/WPA2-PSK
wpa = WPA
pass_phrase = סיסמה
station_info = מכשירים מחוברים
station_number = אין.
host_name = Host Name
wifi_off_alert = You need connect your device to PC and login WebUI to reopen Wi-Fi. Continue?
display_qrcode = Display QR Code
can_not_modify_less_attached = The maximum number of access is less than the current attached devices number, it can not be modified.
cannot_set_when_radar_scaning = The device is searching for radar signals,please wait a moment.
main_ssid_num = Main SSID ({0})
guest_ssid_num = Guest SSID ({0})
wifi_slider_desc = * Drag the progress bar has adjusted the SSID maximum access number
wif_guest_disabled = Guest SSID is disabled
###

#wifi_wps
wps_note_all = WPS (Wi-Fi Protected Setup) is a standard that allows users to set up a wireless network in an easy and secure way without specific configuration, such as: SSID, security mode and password.
wps_note_pin = PIN: You need to enter the PIN that is generated by the access client.
wps_note_pbc = PBC: You can select the PBC (Push Button Configuration) on the web page.
wps_note_pbc2 = PBC: You can select the PBC (Push Button Configuration) on the web page or hold the WPS button for 3-4 seconds on the device to enable WPS function.
wps_note_wait = The device will wait for receiving the access request of wireless access client within 2 minutes.
wps_pin = PIN
wps_pbc = PBC
wps_wifi_off = You can''t operate when Wi-Fi is off!
wps_auth_open = Current encryption type does not support WPS.
wps_on_info = WPS is enabled now, please try again later.
wps_ssid_broadcast_disable = You can''t operate when SSID broadcast is disabled!
wps_pin_validator = Please input a valid PIN number
###

#wifi_sleep_mode
wifi_sleep = Wi-Fi Sleep
sleep_time = Sleep after
sleep_mode_-1 = Never Sleep
sleep_mode_5 = 5 Minutes
sleep_mode_10 = 10 Minutes
sleep_mode_20 = 20 Minutes
sleep_mode_30 = 30 Minutes
sleep_mode_60 = 1 Hour
sleep_mode_120 = 2 Hours
wifi_sleep_note_info = Sleep after: When there''s no Wi-Fi connection in specific time, Wi-Fi will be unavailable, and the system will turn to sleep mode for power-saving.
wifi_auto_power_save = Auto Power Save
###

#wifi_awake
tsw_settings = Wi-Fi Awake Settings
tsw = Wi-Fi Awake
time_sleep_wake_up = Wi-Fi Awake Settings
tsw_timer_on = Wake-up Time
tsw_timer_off = Sleep Time
tsw_sys_time_mode_alert = Please connect to the network and using the SNTP auto synchronizing time.
tsw_time_interval_alert = The time interval should not be less than 10 minutes.
tsw_note = Awake Settings: When awake settings is enabled, device will automatically sleep; Wi-Fi and LTE will be unavailable.
tsw_note_on = Wake-up Time: You can set the wake-up time.
tsw_note_off = Sleep Time: You can set the sleep time.
###

#wifi_wifi_range
wifi_range_settings = Wi-Fi Performance Settings
wifi_range = Wi-Fi Coverage
wifi_short_mode = Short Range Mode - Best battery life
wifi_medium_mode = Standard Mode
wifi_long_mode = Pass Through Wall Mode
wifi_des_short_mode = Short Range Mode
wifi_des_medium_mode = Standard Mode
wifi_des_long_mode = Pass Through Wall Mode
wifi_range_note_range = Wi-Fi Coverage:
wifi_range_note_short = Short Range Mode: Coverage and launch small power consumption, it is the best battery life.
wifi_range_note_medium = Standard Mode: Coverage and emission power consumption is half of equipment support ability, normal power consume.
wifi_range_note_long = Pass Through Wall Mode: Maximum emission power and coverage, if the terminal device still connect to your Wi-Fi network, which will decrease battery life.
wifi_range_note_short_cpe = Short Range Mode: Minimum power consumption and coverage.
wifi_range_note_medium_cpe = Standard Mode: 50% of device power consumption and coverage.
wifi_range_note_long_cpe = Pass Through Wall Mode: Maximum power consumption and coverage.
###

#wifi_internet_wifi
ap_station = Internet Wi-Fi
ap_station_switch = Internet Wi-Fi Switch
ap_station_wlan_mode = Preferred Network
ap_station_wifi_prior = Wi-Fi
ap_station_3g_prior = WWAN
ap_station_current_status = Current Status
ap_station_wlan_connected = Wi-Fi connected
ap_station_wan_connected = WAN connected
ap_station_no_connection = אין חיבור
ap_station_hotspot_list = Wi-Fi Hotspot
ap_station_connect = התחבר
ap_station_disconnect = התנתק
ap_station_add_hotspot = Add Wi-Fi Hotspot
ap_station_edit_hotspot = Edit Wi-Fi Hotspot
ap_station_show_password = הצג את הסיסמה
ap_station_encrypt_type = סוג הצפנה
ap_station_wep_keys = WEP Keys
ap_station_encrypt_type_none = NO ENCRYPTION
ap_station_encrypt_type_wep = WEP
ap_station_wep_key_type_ascii = ASCII
ap_station_wep_key_type_hex = HEX
ap_station_cipher = WPA Algorithms
ap_station_cipher_TKIP = TKIP
ap_station_cipher_AES = AES
ap_station_cipher_AUTO = AUTO
ap_station_security_mode_WEP = WEP
ap_station_security_mode_OPEN = OPEN
ap_station_security_mode_WPAPSKWPA2PSK = WPA-PSK/WPA2-PSK
ap_station_security_mode_SHARED = SHARED
ap_station_security_mode_WPAPSK = WPA-PSK
ap_station_security_mode_WPA2PSK = WPA2-PSK
ap_station_security_mode_EAPAKASIM = EAP-AKA/SIM
ap_station_wep_default_key = Default Key
ap_station_wep_key = Key
ap_station_wep_key_0 = Key 1
ap_station_wep_key_1 = Key 2
ap_station_wep_key_2 = Key 3
ap_station_wep_key_3 = Key 4
ap_station_exceed_list_max = The max number of AP is {0}!
ap_station_search_hotspot_fail = Search hotspot failure!
ap_station_connect_change_alert = Will disconnect from WAN. Continue?
ap_station_update_fail = Operate failed. The hotspot is in connection.
ap_station_enable_confirm = Multi SSID cannot be used when Internet Wi-Fi is being used. Multi SSID is automatically turned OFF if Internet Wi-Fi is ON. Still change settings?
alert_exist_spot = Cannot be registered since the Wi-Fi Hotspot SSID and profile are already registered.
ap_alert_mssid_5GHz = Multi SSID and 5GHz cannot be used when Internet Wi-Fi is being used. Multi SSID is  automatically turned OFF, and network mode is automatically turned to 2.4GHz  if Internet Wi-Fi is ON. Still change settings?
ap_alert_5GHz = 5GHz cannot be used when Internet Wi-Fi is being used. Network mode is automatically turned to 2.4GHz if Internet Wi-Fi is ON. Still change settings?
ap_add_network = Add Network
ap_edit_network = Edit Network
edit_internet_wifi_access_points = Edit Internet Wi-Fi Access Points
next_step_sort = Move Up
prev_step_sort = Move Down
enter_password = הזן סיסמה
###

#wifi_station_info
device_rename = Please input a valid name.
station_info_desc = More access control options, please click here
station_info_sub_title = כל המחשבים שיתחברו לנטסטיק זה יופיעו ברשימה זו כולל שם המחשב ו/או כתובת ה-MAC
wireless_access_device = Wireless Access Device
cable_access_device = Cable Access Devices
###

#lan
lan_setting = LAN Interface Setup
ip_address = IP Address
subnet_mask = Subnet Mask
mac_address = MAC Address
dhcp_server = DHCP Server
dhcp_ip_pool = DHCP IP Pool
dhcp_lease = DHCP Lease Time
hours = hour(s)
minutes = minute(s)
lan_note = Your settings will take effect after restarting your device.
lan_note_ip_address = IP Address: LAN IP address of the router. You can access page management on device via this IP address.
lan_note_subnet_mask = Subnet Mask: Subnet mask for IP address.
lan_note_dhcp_server_enable = DHCP Server Enable: If the Dynamic Host Configuration Protocol (DHCP) service is enabled, the device allocates IP addresses to clients connected to it.
lan_note_dhcp_server_disable = DHCP Server Disable: If the Dynamic Host Configuration Protocol (DHCP) service is disabled, the device does not allocate IP addresses to clients connected to it and IP addresses must be entered manually from each client.
lan_note_dhcp_ip_pool = DHCP IP Pool: Starting and Ending IP address specify IP address range which is assigned by DHCP server to access devices. The IP address out of this range cannot be assigned by DHCP server.
lan_note_dhcp_lease_time = DHCP Lease Time: Lease Time specifies how long a computer can use IP address. If the device will continue to use IP address, it must initiate request again before lease time expires. This IP address will not assign to other device until the old device initiates no request when its lease time expires.
lan_confirm_reopen = Your settings will take effect after restarting your device. Do you want to continue?<br/><br/><i>Note: Click Yes to submit the request and restart the device. If you choose No, it means that you give up the current operation.</i>
lan_change_none = The parameters didn''t have any change,so your device will not restart.Do you want to continue?
###

#mtu_mss
mtuMssCompare = MTU must greater than MSS at least 40
mtu_mss_note = Please don''t modify the parameters, unless your Network has problems.
###

#firewall_port_filter
filter_basic_setting = Basic Settings
port_filter_enabled = MAC/IP/Port Filtering
default_policy = Default Policy
default_policy_note = You can set firewall policies to protect your network from viruses, worms and malicious activities on the Internet.
default_policy_note_filter = Only when filtering is enabled, the filter policy is available.
accepted = Accepted
dropped = Dropped
port_filter_setting = MAC/IP/Port Filtering Settings
macExam = (e.g., 00:1E:90:FF:FF:FF)
dest_ip_address = Dest. IP Address
source_ip_address = Source IP Address
port_filter_action = Action
filter_accept = Accept
filter_drop = Drop
protocol_None = ALL
protocol_ICMP = ICMP
port_filter_list = Current MAC/IP/Port Filtering Rules in System
dest_port_range = Dest. Port Range
source_port_range = Source Port Range
filter_accept_note = Others would be accepted.
filter_drop_note = Others would be dropped.
filter_optional = Please input any IP, MAC or/and port value
mac_check = Invalid MAC address
filter_ip_setting = IP Settings
filter_ipv4 = IPv4
filter_ipv6 = IPv6
ip_type = IP Type
source_ipv6_address = Source IPv6 Address
dest_ipv6_address = Dest. IPv6 Address
port_filter_note_mac_address = MAC Address: Set MAC address to be filtered.
port_filter_note_source_ip_address = Source IP Address: Set source IP address to be filtered.
port_filter_note_dest_ip_address = Dest IP Address: Set dest IP address to be filtered.
port_filter_note_protocol = Protocol: Set protocol to be used for filtering.
port_filter_note_source_port_range = Source Port Range: Set source port numbers to be filtered.
port_filter_note_dest_port_range = Dest Port Range: Set dest port numbers to be filtered.
port_filter_note_action = Action: Set to handle the packet if it matches with the rule.
port_filter_note_comment = Comment: Enter comment for filter settings. It contains 0-9 a-z A-Z ! # ( ) + - . / % = ? @ ^ _ { | } ~ .
port_filter_note_info = The filter policies are matched one by one with the rules. And if met this provision, it won''t continue to match the rules listed below.
###

#firewall_portforward
protocol_TCP&UDP = TCP+UDP
protocol_TCP = TCP
protocol_UDP = UDP
virtual_server_setting = Virtual Server Settings
port_forward_setting = Port Forwarding Settings
port_forward_list = Current Virtual Servers in system
port_forward_note_info = Configure a Port Forward to enable external computers to access WWW, FTP or other services provided by LAN.
port_forward_note_port = Port Range: Set port numbers to be filtered.
port_forward_note_ip_address = IP Address: Specify a computer located at LAN to provide services.
port_forward_note_protocol = Protocol: Protocols applied by services.
port_forward_note_comment = Comment: Type comment for Port Mapping rule. It contains 0-9 a-z A-Z ! # ( ) + - . / % = ? @ ^ _ { | } ~ .
port_range = Port Range
protocol = Protocol
comment = Comment
ipExam = (e.g., 192.168.0.101)
rules_max = The rule number exceeds {0}.
rule_exist = This rule already exists.
rule_max_note = The maximum number of rules is 10.
rule_max_note_v4v6 = The maximum of rules for IPv4 and IPv6 is 10 respectively.
rules_max_v4v6 =  The {0} rule number exceeds {1}.
rule_exist_v4v6 = This {0} rule already exists.
###

#firewall_port_map
port_map = Port Mapping
port_map_basic = Basic Settings
port_map_setting = Port Mapping Settings
source_port = Src. Port
dest_port = Dest. Port
port_map_list = Current Port Mapping Rules in System
port_map_note_info = Configure a Port Mapping to enable external computers to access WWW, FTP or other services provided by LAN.
port_map_note_port = Src. Port/Dest Port: The port of the computer that provides services.
port_map_note_dest_ip_address = Dest. IP Address: Specify a computer located at LAN to provide services.
port_map_note_protocol = Protocol: Protocols applied by services.
port_map_note_comment = Comment: Type comment for Port Mapping rule. It contains 0-9 a-z A-Z ! # ( ) + - . / % = ? @ ^ _ { | } ~ .
###

#firewall_upnp
upnp = UPnP
upnp_setting = UPnP Settings
upnp_note_info = Universal Plug and Play (UPnP) is a set of networking protocols that allows networked devices, such as PC, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other''s presence on the network and establish functional network services for data sharing, communications, and entertainment.
###

#firewall_dmz
dmz = DMZ
dmz_setting = DMZ Settings
dmz_note_info = If a terminal device can''t run network applications via this device, please enter IP address of the terminal device in the entry box when DMZ is enabled.
dmz_note_function = You can configure DMZ address, enable or disable DMZ on this page.
###

#firewall_system_security
remote_management = Remote Management (via WAN)
ping_from_wan = Ping From WAN Filter
###

#others_password
password_management = סיסמת התחברות
current_password = סיסמה נוכחית
new_password = סיסמה חדשה
confirm_password = אשר את הסיסמה החדשה
current_password_error = הסיסמה הנוכחית אינה נכונה!
password_note_info = אתה יכול לשנות את סיסמת ההתחברות במסך זה.
password_note_valid = הסיסמה אינה יכולה להיות ריקה, וחייבת להכיל לפחות 32 תווים.
password_note_input = הסיסמה מכילה 0-9 a-z A-Z ! # $ * + , - . % : = ? @ [ ] ^ _ { | } ~
pwd_sub_title = Manage information about your wireless router
pwd_note = When you log in wireless router, need to input this password (password is different from your wireless network password)
equalToPin = The PINs you've entered do not match
equalToPassword = הסיסמאות אינן תואמות
###

#others_pin
pin = PIN
current_pin = Current PIN
pin_management = PIN Management
pin_status = PIN Status
modify_pin = Change PIN
cannot_operate_when_connected = Can''t operate when connecting to network!
cannot_change_pin_when_connected = Can''t change PIN when connecting to network!
pin_note_info = Apply PIN security settings in PIN Management to prevent unauthorized use of the SIM, USIM, or UIM card. If you want to change current settings, please disconnect from network first.
pin_note_operator = If enable PIN, you may need to enter PIN when the device is powered on. If disable PIN, no PIN is required.
pin_note_modify = You can change PIN when PIN is enabled.
###

#others_reset
restore = Reset
restore_title = Reset Factory Settings
restore_button = Reset Factory Settings
restore_confirm = Parameters will be reset to factory defaults, the device will restart. Continue?
restore_when_connected = Please disconnect from WAN first!
restoring = Resetting factory settings
restore_note_info = Click Reset to reset all settings to defaults, and the device will restart automatically.
###

#others_restart
restart = Restart
restart_button = Restart Device
restart_confirm = Restart the device?
restarting = Restarting Device
###

#others_fastboot
fastboot = Fast Boot
fastboot_setting = Fast Boot Settings
fastboot_note = If enable Fast Boot function, your device will start in a short time.
###

#sd_card
sdcard = SD Card
httpshare = HTTP Share
sd_card_mode = Mode
sd_card_share_setting = Share Setting
sd_card_share_usb_mode = USB
sd_card_share_http_share_mode = HTTP SHARE
sd_card_status = Status
sd_card_file_to_share = File to Share
sd_card_access_type = Access Type
sd_card_path_to_share = Path to Share
sd_card_entire_sd_card = Entire SD Card
sd_card_custom_setting = Custom 
sd_card_read_write = Read/Write
sd_card_readonly = Read Only
sd_card_share_setting_no_sdcard = No SD Card!
sd_card_share_setting_exist = The folder/file already exists!
sd_card_share_setting_noexist = The folder/file does not exist!
sd_card_status_info_0 = No SD Card!
sd_card_status_info_1 = SD Card already exists and can be used now
sd_card_status_info_2 = SD Card already exists, but it is invalid now! Please retry in 5 minutes. If still invalid, please check SD Card!
sd_card_status_info_2_reason = Possible reasons are as follows
sd_card_status_info_2_reason_1 = SD card is of NTFS format, please switch to USB mass storage.
sd_card_status_info_2_reason_2 = SD card is loading, please retry in 5 minutes. If still invalid, please check SD card.
sd_card_invalid_chars_cant_download = The file name contains invalid characters and can not be downloaded! (< > " '' & + / \\ : * | # ? ~ ` are invalid characters)
sd_card_invalid_chars_cant_upload = The file name contains invalid characters and can not be uploaded! (< > " '' & + / \\ : * | # ? ~ ` are invalid characters)
note_not_support_fs_ntfs = In HTTP Share Mode, the device only supports FAT file system!
note_web_share_mode = HTTP Share Mode: Share SD card via web browser. The removable drive mapping of SD card via USB port will be disabled.
note_usb_access = USB Access Only: By the removable drive mapping, user can access SD card via USB cable only. The web page of sharing SD card will be disabled.
note_http_share_usb_access = USB Access Only: By the removable drive mapping, user can access SD card via USB cable only. The web page of sharing SD card will be disabled.
note_http_share_cannot_access = You can''t access this page!
note_path_to_share_example = Path to Share: You can input the sharing path, such as /Picture. By typing only a slash in Path to Share filed, you agree to share entire SD card.
note_upload_not_refresh = When you''re in process of downloading or uploading the file, please don''t refresh the page!
note_upload_single_file_2g = The single file upload can not be above 2G.
note_uploading_not_refresh = Uploading, please don''t refresh the page!
note_invalid_file_path = Path to Share can''t be a dot, and can''t contain following characters: < > " '' & + / \\ : * | # ? ~ `
browse_btn = Browse
change_btn = Change
no_file_selected = No file selected...
sd_no_file_selected = Please select a file
sd_name = Name
sd_path = Path:
sd_rename = Rename
sd_download = Download
sd_file_size = File Size
sd_update_time = Updated Time
no_sdcard = No SD Card!
sd_card_folder_name_is_null = Please enter a name
get_file_list_failure = Get file list failed
create_folder_failure = Create folder failed
delete_folder_failure = Delete folder/file failed
sd_card_path_too_long = File path too long
back_to_login = Back to Login
sd_config_changed_reload = The settings for SD card share are changed, and the page will reload.
sd_upload_space_not_enough = The space is not enough!
sd_upload_data_lost = Upload failed, please retry.
sd_share_path_is_invalid = Path to Share is invalid, please set the share path
sd_share_path_cant_rename = The folder was shared and cannot be renamed.
sd_share_path_cant_delete = The folder "{0}" was shared and cannot be deleted.
sd_share_path_invalid = The shared path does not exist.
###

#ussd
USSD = USSD
ussd = USSD
ussd_send_to = Send to
ussd_send = Send
ussd_cancel = Cancel
ussd_reply_to = Reply to
ussd_reply = Reply
ussd_contents = Contents
ussd_timeout = Network Timeout!
ussd_operation_timeout = Operation Timeout!
ussd_no_service = No Network Service!
ussd_retry = Operation Failed! Please Retry!
ussd_unsupport = USSD is unsupported!
ussd_info_error = Get Information Error!
ussd_fail = Operation Failed!
ussd_error_input = Error Input!

#stk
STK =STK
stk = STK
STK_ = STK
stk_info = STK Information
version_stk_no_info = This version does not support STK.
simcard_stk_no_info = This SIM card does not support STK.
input_please = Please Input
max_number = Max Number
min_number = Min Number
input_too_short = The input is too short!
input_too_long = The input is too long!
form_number_wrong = Form of the number is wrong!
###

#update
update_info = Update Information
update_no_info = Software is up to date
update_new_version_found = New version available
update_current_version = Current Version
update_new_version = New Version
update_link_prompt = Click the following links to download update tools.
update_skip_btn = Apply
update_id_skip_info = If you don''t want to update, please click &quot;Skip&quot;.
update_remind = Remind me when new version found.
update_management = Update Management
update_log = Bug Fixed
update_note = Note
update_notice = New version found. For more details, please goto Settings->Device Settings->Update management
update_note_info = Click the link to download update tool.
update_note_install = Extract update tool and then run it to start updating.
update_note_linux = Can''t upgrade online in Linux. Please upgrade in Windows or on a Mac.
update_status = Status
update_settings = Update
wifi_connect_alert = You can only update by connecting the ethernet cable.
###

#ota_update
ota_update = Update Management
ota_title = Update
ota_no_new_version = No new version found.
ota_new_version = Found new version. Do you want to update?
ota_connect_server = Connecting to server
ota_connect_server_successfully = Connected to server successfully
ota_downloading = Downloading...
ota_download_failed = Download failed
ota_no_network = No network
ota_network_disconnected = Please connect to network before updating!
ota_interrupted_alert = Found new version. Please login to update!
ota_interrupted = Resume the downloading task which was interrupted before?
ota_download_success = Download completed, and the device will restart. Please wait. Please do not power off or turn off the device during the update.
ota_update_success = Updated successfully!
ota_update_failed = Update failed.
ota_connect_server_failed = Unable to connect to server.
ota_download_warning = Make sure there''s enough battery; Don''t force stop during download process.
ota_update_warning = Attention: Don''t force stop during update process.
ota_cancel = Update has been cancelled!
ota_pkg_exceed = The update package is too large!
ota_have_cancel = You have already cancelled!
ota_roamming = The Roaming Setting is disabled. To enable it, please click in the checkbox  on this page.
ota_low_battery = Download completed and battery is low. The device will restart after battery is fully charged!
ota_md5_error = Check update package failed.
ota_version = Version:
ota_update_setting = Auto Check Settings
ota_auto_update_switch = Auto-check New Version
ota_update_interval_day = Auto-check Cycle
ota_roaming_setting = Roaming Settings
ota_update_roaming_remind = Check this option, the device will update when roaming, which will incur roaming charges.
ota_update_manual = Check New Version
ota_check_new_version = Check
ota_check_new_version_desc = Click Check button for checking new version immediately.
ota_check_roaming_confirm = You are on roaming! Would you like to continue?
ota_update_every_day = Every day
ota_update_15_day = 15 days
ota_update_30_day = 30 days
ota_new_version_checking = Checking new version...
ota_update_running = Update is ongoing...
ota_check_fail = Check new version failed!
ota_last_update_check = Last Update:
###

#notes
home_note = The table shows the information of connected wireless device(s).
apn_note_whole_page = You can set the Access Point Name(APN) on this page.
apn_note_mode = Mode: If a fixed APN is provided by your service provider, select Manual APN. Otherwise, please select Auto APN, and the device will automatically obtain parameters.
apn_note_profile = Profile: It contains one or more profile names.
apn_note_pdp_type = PDP Type: IPv4/IPv6/IPv4&IPv6.
apn_note_profile_name = Profile Name: It refers to the name that you assign to the new profile.
apn_note_apn = APN: Access Point Name. The APN contains 0-9 a-z A-Z . - and it can''t start with and end with .or -.
apn_note_dns_mode = DNS Mode: If a fixed IP address is provided by your service provider, select Manual DNS. Otherwise, please select Auto DNS, and the device will automatically obtain parameters.
apn_note_authentication = Authentication: It is provided by your Internet Service Provider(ISP).Password Authentication Protocol (PAP) provides a simple method without encryption for the peer to establish its identity using a 2-way handshake. Challenge-Handshake Authentication Protocol (CHAP) is used to periodically verify the identity of the peer using a 3-way handshake.
apn_note_username = User Name: User name is used to obtain authentication from the ISP when the connection is established.
apn_note_password = Password: Password is used to obtain authentication from the ISP when the connection is established.
apn_note_set_default = Click "Set as default" to set this profile as the default profile.

wifi_basic_note_multi_ssid_switch = Multi SSID Switch: 2 SSID can be used at the same time.
wifi_basic_note_network_name = Network Name(SSID): SSID can be understood as network name. When change the SSID, please enter a string less than 32 characters as the name for your Wi-Fi. The string contains numbers, letters (a-z, A-Z), special characters (!#()+-./%=?@^_{|}~) and space, and it can''t start and end with space.
wifi_basic_note_network_name_input = The network name contains 0-9 a-z A-Z ! # ( ) + - . / % = ? @ ^ _ { | } ~ and space, and it can''t start and end with space.
wifi_basic_note_broadcast = Broadcast Network Name(SSID): If enable this function, the device will broadcast SSID. Other wireless devices will discover and connect to this device.
wifi_basic_note_security_mode = Security Mode:
wifi_basic_note_no_encryption = OPEN: Unencrypted mode. There are risks that network will be used by unauthorized individuals. This encryption mode isn''t recommended.
wifi_basic_note_wpa_psk_aes = WPA2(AES)-PSK: It is the secure version of WPA with implementation of the 802.11i standard.
wifi_basic_note_wpa_psk = WPA-PSK/WPA2-PSK: WPA Pre-Shared Key (WPA-PSK). WPA2-PSK is the secure version of WPA with implementation of the 802.11i standard.
wifi_basic_note_pass_phrase = Pass Phrase: The pass-phrase contains 0-9 a-z A-Z ! # ( ) + - . / % = ? @ ^ _ { | } ~
wifi_basic_note_max_station_number = Max Station Number: You can select the maximum number of wireless terminals which can connect to the device.
wifi_advanced_note_whole_page = You can set Wi-Fi advanced characters on this page.
wifi_advanced_note_band_selection = Band Selection: You can select the suitable band for your device.
wifi_advanced_note_network_mode = Network Mode: Select the suitable Wi-Fi network mode, the device Wi-Fi performance will be improved.
wifi_advanced_note_country_code = Country/Region Code: You can select the suitable Country/Region Code for your device.
wifi_advanced_note_frequency = Frequency (Channel): Select appropriate channel to optimize the performance and coverage of your wireless network.

ap_station_note_info = Please make sure that the IP address of Wi-Fi hotspot you''ve connected isn''t in the range of this device IP address, or you won''t have access to Internet via the Wi-Fi hotspot.
ap_station_note_disable_info = If enable multi-SSID, Internet Wi-Fi will be disabled.
diconneted_operate_note = To change current setting, please disconnect from network.
###


#redireact
no_simcard_jump = לא הוכנס סים, אנא הכנס כרטיס סים
simcard_blocked = כרטיס הסים חסום
invalid_simcard_jump = Invalid SIM card, please insert a valid SIM card
locked_simcard_jump = SIM card is locked, please login and unlock
no_connect_jump = אין חיבור, נא התחברו מחדש ונסה שוב
pppoe_error_jump = PPPoE username or password is incorrect, please login and modify
connect_failed_jump = Network connection failed, please login and check
flow_beyond_jump = Traffic exceeds limit, please login and view data usage.
fota_upgrade_jump = Detected a new software version, please login and upgrade.
locked_simcard_jump_login = SIM card is locked, please unlock
no_connect_jump_login = אין חיבור, נא התחברו מחדש ונסה שוב
pppoe_error_jump_login = PPPoE username or password is incorrect, please modify
connect_failed_jump_login = Network connection failed, please check
flow_beyond_jump_login = Traffic exceeds limit, please view data usage.
fota_upgrade_jump_login = Detected a new software version, please upgrade.
###


##CPE wordings Start###############################
#network_dial_settings
wan_note_dial = Dial-up Mode:
wan_note_connection_mode = Please select network connection mode for your device:
wan_note_connection_mode_pppoe = PPPoE: Access Internet. You may ask your network provider for PPPoE username and password.
wan_note_connection_mode_dhcp =  Dynamic IP: Access Internet via dynamic IP address.
wan_note_connection_mode_static = Static IP: Access Internet via static IP address. Please set IP address, subnet mask, default gateway, primary and secondary DNS.
wan_note_user_name = User Name: Enter your PPPoE account.
wan_note_password = Password: Enter your PPPoE password.
pppoe_mode_type_PPPOE = PPPoE
pppoe_mode_type_STATIC = Static IP
pppoe_mode_type_DHCP = Dynamic IP
###

#dlna setting
dlna_setting = DLNA Settings
dlna_language = Language
dlna_language_chinese = Chinese
dlna_language_english = English
dlna_device_name = Device Name
dlna_media_type = Shared Media Type
dlna_media_info = Share Settings
dlna_audio = Music
dlna_image = Image
dlna_video = Video
dlna_rescan = Rescan
dlna_note_info = You can set Digital Living Network Alliance(DLNA) when SD card is available or HTTP Share Mode is enabled.
dlna_note_httpshare = You can set Digital Media Server (DMS) language, device name, and media type which you want to share on this page.
dlna_note_rescan = In order to allow DLNA multimedia database to be synchronized with SD card, please rescan.
dlna_scanning = Dlna state : rescanning...
dlna_scanned = Dlna state : rescan complete.
dlna_need_rescan = Dlna state : need rescan.

keyword_rule = נא הזינו סיסמה המורכבת מספרות או מאותיות באנגלית בלבד ובאורך של 4 תווים לפחות
pc_keyword = Link Keyword
binding_ip = Binding IP
cancel_binding_ip = Cancel Bind
the_only_ipAddress = the IP address is binded
the_only_macAddress = the MAC address is binded
dhcp = DHCP
bind_ip_mac = MAC-IP Bind
bind_ip_mac_switch = MAC-IP Bind Switch
user_setting = User Setting
bind_ipMac_list = Current Bind List
bind_restart_tips = If you want to bind or unbind an address successfully, please restart the device
bind_status = Bind Status
bind_ip_note_all = This function is for t Mac address and IP address binding.
bind_ip_note_switch = This function active when DHCP server is enable.
bind_ip_note_macaddr = MAC Address: the MAC address of this bind.
bind_ip_note_ipaddr = IP Address: the IP address of this bind.
static_address_check = The IP address and Main SSID gateway can''t be in different subnet.
mac_ip_address_filter_max = The maximum number of rules is 10.

opmode = Change Mode
wds = WDS
url_filter = URL Filtering

voip_settings = VoIP Settings
voip_user_details = User Details
voip_advanced_settings = Advanced Settings
voip_supplementary_service = Supplementary Service

url_check = invalid URL
url_filter_check = invalid url filter format
sntp_invalid_server_name = Invalid URL format or invalid ip address
server_alreay_exist = This server is already exist
forwarding_uri_check = Invalid Value

wifi_switch = Wi-Fi Switch
ap_isolation = AP Isolation
#mac filter
black_list = Black List
black_list_switch = Black List Switch
block = Block
black_list_max = The max number of black list is 32!
black_yourself_tip = You can''t block yourself!

auto_connect = Auto Connect
manual_connect = Manual Connect

default_Gateway = Default Gateway
primary_dns = Primary DNS Server
secondary_dns = Secondary DNS Server
gateway_check = Please input a valid gateway

#SNTP
sntp = SNTP
local_current_time = Current Local Time
time_set_mode = Time Set Mode
time_set_time_manual = Manual Set Time
time_set_time_auto = Sntp auto Synchronization
year = Year
month = Month
date = Date
hour = Hour
minute = Minute
second = Second
sunday = Sunday
monday = Monday
tuesday = Tuesday
wednesday = Wednesday
thursday = Thursday
friday = Friday
saturday = Saturday
stnp_server1 = SNTP Server1
stnp_server2 = SNTP Server2
stnp_server3 = SNTP Server3
time_zone = Time Zone
daylight_saving_time = Daylight Saving Time
daylightsave_0 = Disable
daylightsave_1 = Enable
sntp_syn_time_wan_connected = Use sntp auto synchronizing time must after wan connected succeed
operation_not_supported = operation not supported！
network_terminated = USSD terminated by network
upgrade_file_nomatch = You do not select the root_uImage or modem.zip!
upgrade_confirm = Do you really want to upgrade the Image?
upgrading = Upgrading, please wait....
upgrading_alert = Upgrading, please don''t cut off your power supply. After upgrade, it will restart automaticly!
upgrad_note = Please select the version you want to upgrade, then click the ''Apply'' button to start upgrade.
timeZone_5.75 = (GMT+05:45) Kathmandu
timeZone_-1 = (GMT-01:00) Azores
timeZone_-4 = (GMT-04:00) Atlantic Time (Canada)
timeZone_-4.5 = (GMT-04:30) Caracas
timeZone_9.5 = (GMT+09:30) Adelaide
timeZone_-2 = (GMT-02:00) Mid-Atlantic
timeZone_-6-3 = (GMT-06:00) Saskatchewan
timeZone_-6 = (GMT-06:00) Central America
timeZone_-6-2 = (GMT-06:00) Guadalajara, Mexico City, Monterrey
timeZone_-6-1 = (GMT-06:00) Central Time (US and Canada)
timeZone_6.5 = (GMT+06:30) Yangon (Rangoon)
timeZone_9.5-1 = (GMT+09:30) Darwin
timeZone_5-1 = (GMT+05:00) Islamabad, Karachi, Tashkent
timeZone_8-2 = (GMT+08:00) Kuala Lumpur, Singapore
timeZone_8-3 = (GMT+08:00) Perth
timeZone_-3 = (GMT-03:00) Brasilia
timeZone_8-1 = (GMT+08:00) Irkutsk, Ulaan Bataar
timeZone_1-3 = (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb
timeZone_1-4 = (GMT+01:00) West Central Africa
timeZone_8-4 = (GMT+08:00) Taipei
timeZone_1-1 = (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
timeZone_1-2 = (GMT+01:00) Brussels, Copenhagen, Madrid, Paris
timeZone_5.5-1 = (GMT+05:30) Sri Jayawardenepura
timeZone_9 = (GMT+09:00) Osaka, Sapporo, Tokyo
timeZone_-12 = (GMT-12:00) International Date Line West
timeZone_2-8 = (GMT+02:00) Windhoek
timeZone_5.5 = (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi
timeZone_4 = (GMT+04:00) Abu Dhabi, Muscat
timeZone_2-7 = (GMT+02:00) Minsk
timeZone_2-6 = (GMT+02:00) Jerusalem
timeZone_2-5 = (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius
timeZone_2-4 = (GMT+02:00) Harare, Pretoria
timeZone_2-3 = (GMT+02:00) Cairo
timeZone_-8 = (GMT-08:00) Pacific Time (US and Canada)
timeZone_2-2 = (GMT+02:00) Beirut
timeZone_6-1 = (GMT+06:00) Astana, Dhaka
timeZone_12-1 = (GMT+12:00) Fiji Is., Kamchatka, Marshall Is.
timeZone_-10 = (GMT-10:00) Hawaii
timeZone_0-1 = (GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London
timeZone_-3.5 = (GMT-03:30) Newfoundland
timeZone_4.5 = (GMT+04:30) Kabul
timeZone_-7 = (GMT-07:00) Arizona
timeZone_9-1 = (GMT+09:00) Seoul
timeZone_9-2 = (GMT+09:00) Yakutsk
timeZone_-1-1 = (GMT-01:00) Cape Verde Is.
timeZone_7-1 = (GMT+07:00) Krasnoyarsk
timeZone_-4-3 = (GMT-04:00) Santiago
timeZone_-4-2 = (GMT-04:00) Manaus
timeZone_-4-1 = (GMT-04:00) Caracas, La Paz
timeZone_3 = (GMT+03:00) Baghdad
timeZone_3-3 = (GMT+03:00) Nairobi
timeZone_3-4 = (GMT+03:00) Tbilisi
timeZone_-7-1 = (GMT-07:00) Chihuahua, La Paz, Mazatlan
timeZone_-7-2 = (GMT-07:00) Mountain Time (US and Canada)
timeZone_4-1 = (GMT+04:00) Baku
timeZone_0 = (GMT) Casablanca, Monrovia, Reykjavik
timeZone_4-2 = (GMT+04:00) Yerevan
timeZone_2-1 = (GMT+02:00) Athens, Bucharest, Istanbul
timeZone_11 = (GMT+11:00) Magadan, Solomon Is., New Caledonia
timeZone_1 = (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
timeZone_-11 = (GMT-11:00) Midway Island, Samoa
timeZone_7 = (GMT+07:00) Bangkok, Hanoi, Jakarta
timeZone_-3-1 = (GMT-03:00) Buenos Aires, Georgetown
timeZone_-8-1 = (GMT-08:00) Tijuana, Baja California
timeZone_-3-2 = (GMT-03:00) Greenland
timeZone_-5 = (GMT-05:00) Bogota, Lima, Quito, Rio Branco
timeZone_13 = (GMT+13:00) Nuku''alofa
timeZone_10 = (GMT+10:00) Brisbane
timeZone_3-2 = (GMT+03:00) Moscow, St. Petersburg, Volgograd
timeZone_3-1 = (GMT+03:00) Kuwait, Riyadh
timeZone_-5-2 = (GMT-05:00) Indiana (East)
timeZone_-9 = (GMT-09:00) Alaska
timeZone_8 = (GMT+08:00) Beijing, Chongqing, Hong Kong S.A.R., Urumqi
timeZone_-5-1 = (GMT-05:00) Eastern Time (US and Canada)
timeZone_5 = (GMT+05:00) Ekaterinburg
timeZone_12 = (GMT+12:00) Auckland, Wellington
timeZone_6 = (GMT+06:00) Almaty, Novosibirsk
timeZone_10-4 = (GMT+10:00) Vladivostok
timeZone_10-3 = (GMT+10:00) Hobart
timeZone_10-2 = (GMT+10:00) Guam, Port Moresby
timeZone_2 = (GMT+02:00) Amman
timeZone_10-1 = (GMT+10:00) Canberra, Melbourne, Sydney
###

#operation mode
opmode_bridge = Bridge Mode
opmode_cable = Cable Broadband Mode
opmode_gateway = Wireless Broadband Mode
EthPort_Status = Ethernet Port Status
change_mode = Change Mode
current_mode = Current Mode:
change = Change
change_mode_alert = Cable Broadband mode can only use Wi-Fi to access, please remember Wi-Fi SSID and password! Continue?
opmode_msg1 = If wireless broadband mode is enabled, please remove network cable of public network.
opmode_msg2 = The device will be restarted when operation mode is changed.
#pppoe dial
pppoe_mode = PPPoE
static_success = Successfully set static IP.
dyn_success = Successfully obtained dynamic IP.
static_fail = Set static IP failed.
dyn_fail = Obtain dynamic IP failed.
ip_gate_not_same = IP Address and Default Gateway can''t be same!
#url filter
url_filter_list = Current URL Filtering
url = Please input a valid URL
url_filter_max = The maximum number of URL filter rules is {0}
url_repeated = This URL already exists.
urlparent = The end of URL can''t follow with /.
nameparent = Your input contains invalid characters (* $ [ & : , ; + < > '' " \\ ` # ] ￥ are invalid characters)
###

#wds
wds_mode = WDS Mode
wds_mode_0 = Disable
wds_mode_1 = RootAP Mode
wds_mode_2 = Bridge Mode
wds_mode_3 = Repeater Mode
repeater_ssid = Repeater SSID
wpa_algorithms = WPA Algorithms
enable_wds_confirm = If enable WDS, Wi-Fi basic settings will be disabled. Continue?
###

#sys log
sys_log = System Log
log_setting = Log Settings
syslog_mode_all = All
syslog_mode_wan_connect = WAN Connect
syslog_mode_sms = SMS
syslog_mode_tr069 = tr069
syslog_mode_voip = VoIP
syslog_mode_dlna = DLNA
syslog_mode_wlan = Wi-Fi
syslog_mode_router = Router
view_log = View log
log_info = Log information
###

#tr069
tr069config = TR069Config
server_url = Server URL
server_user_name = Server Username
server_password = Server Password
connection_request_url = Connection Request URL
connection_request_uname = Connection Request Username
connection_request_password = Connection Request Password
connect_alert = Please connect the WAN Connection first!
tr069_name_check = Account incorrect, it must be 0~9, A~Z, a~z
tr069_password_check = Password incorrect, it must be be 0~9, A~Z, a~z, _ or *
port = Port
###

#add at 2013.6.20
periodic_inform = Periodic Inform
periodic_inform_interval = Periodic Inform Interval
periodic_inform_time = Periodic Inform Time
certificate_import = Certificate
import_certificate_btn = Import
certificate_file_nomatch = You do not select the ca-cert.crt!
###

#voip setting
outbound_mode = Outbound Mode
outbound_server = Outbound Server
outbound_port = Outbound Port
stun_mode = STUN Mode
stun_server = STUN Server
register_every = Register Every
advanced_options = Advanced Options
sip_port = SIP Port
rtp_port = RTP Port
voip_outbound_port_check = Invalid port.
voip_time_check = Invalid register time.
timeRange = [1, 3600] seconds
voip_sip_port_check = Invalid port.
voip_port_compare = Invalid port range.
warn_information = The parameters of VoIP set success, please register again.
###

#voip user details
user_details_title = SIP Server and Configuration
sip_register_server = SIP Register Server
sip_domain = SIP Domain
sip_realm = SIP Realm
sip_proxy_mode = SIP Proxy Mode
sip_proxy_server = SIP Proxy Server
authorization = Authorization
display_name = Display Name
authorized_user_name = Authorized User Name
authorized_password = Authorized Password
voip_register_status = VoIP Register Status
register_failed = Register Fail
register_success = Register Success
register_connecting = Register Connecting
unregister = Unregister
deregister = Deregister
sip_domain_check = SIP Domain Address invalid
sip_realm_check = SIP Realm invalid
sip_proxy_server_check = IP Proxy Server invalid
display_name_check = Display Name invalid
authorized_username_check = Authorized User Name invalid
account_password_check = Password invalid
###

#voip advanced settings
sip_advanced_options = Advanced Options
adv_sip_t38 = T.38 FAX Encoder
sip_dtmf = DTMF
voip_sip_dtmf_method_inband = InBand
voip_sip_dtmf_method_rfc2833 = RFC2833
voip_sip_dtmf_method_sipinfo = SIPInfo
sip_encoder = Encoder
voip_sip_encoder_method_0 = G.711 u-Law
voip_sip_encoder_method_1 = G.711 a-Law
voip_sip_encoder_method_2 = G.722
voip_sip_encoder_method_3 = G.729
voip_sip_encoder_method_4 = G.726-16kps
voip_sip_encoder_method_5 = G.726-24kps
voip_sip_encoder_method_6 = G.726-32kps
voip_sip_encoder_method_7 = G.726-40kps
sip_vad = VAD
sip_cng = CNG
###

#voip supplementary service
sip_protocol_voip = VoIP supplementary service
sip_protocol_call_forw = Call Forwarding
voip_forwarding_mode_1 = Unconditional forwarding
voip_forwarding_mode_2 = When busy
voip_forwarding_mode_3 = When no answer
voip_forwarding_mode_0 = Cancel all forwarding
sip_protocol_forw_uri = Forwarding URI
show_msg = Please press ''*80'' on the phone!
sip_protocol_incoming_call = Do Not Disturb
sip_protocol_call_waiting = Call Waiting
wds_note = WDS : Wireless Distribution System
#voip user details
connect_note = Please connect to internet if you want to use VoIP phone!
#fota
upgrade_pack_fix_success = Upgrade success!
upgrade_pack_fix_failed = Upgrade failed!
have_new_version = New version is found,the device will update.
######key same value different###########

switch_port_title = Switch ethernet port to serial port
open_serial_port = Turn ethernet port to serial port
close_serial_port = Close ethernet port to serial port
switching = switching...

#Restart_schedule
restart_schedule = Restart Schedule
enable_reboot_switch = Turn on automatic restart function
enable_reboot_byday = Automatic restart schedule based on every day
enable_reboot_byweek = Automatic restart schedule based on the week
enable_reboot_bymonth = Automatic restart schedule based on the month
synchronized = synchronized
unsynchronized = unsynchronized
week = Week
login_password_length_check = Please input 4 characters at least.
system_time_not_syn = System time not synchronized!
####

#parental control
parental_control = Parental Control
pc_children_group = Kids Devices
pc_manage = Manage
pc_no_children_device = Not set Kids Devices
pc_children_group_desc = All kids devices will follow network access policy
pc_edit_host_name = Edit the hostname:
pc_internet_role = Network Access Policy
pc_time_limited =  Online Time Setting
pc_site_white_list = Website Whitelist
pc_manage_children_group = Manage Kids Devices
pc_current_attached_devices = Current Devices
pc_action = Operation
pc_remove = Remove
pc_remove_all = Remove All
pc_add = Add
pc_leave = Leave
pc_add_white_site = Add The White List
pc_in_child_group = Added as kids device
pc_forbid_time = Not Allow
pc_allow_time = Allow
pc_setting_desc = Click or rectangle with your mouse to allow or forbid network access
pc_name = Name
pc_link = URL
pc_not_save = Data not saved, please pay attention to save
pc_link_exist = URL already exists!
no_data = No data
sun = SUN
mon = MON
tues = TUES
wed = WED
thur = THUR
fri = FRI
sat = SAT

parental_add_self = If you add this device to kids group, you will have no access to parental controls. Tap Yes/No to continue.
modify_hostname_invalid = Your input contains invalid characters (* $ [ & : , ; + < > '' " \\ ` # ] ￥ are invalid characters)
ddns_hashvalue_check = Invalid Value
Hash_value_is_empty = Hash value is empty!
parent_control_note_kids = Kids Devices: Manage Kids devices.
parent_control_note_time = Online Time Setting: Set online time for kids.
parent_control_note_whitelist = Website Whitelist: Set website white list for kids to access websites.
###

##ddns####
##CPE wordings End###############################


###下面是小终端wording##############
skip = Skip
confirm_to_pcview = On some devices the full Web UI may not work, do you still want to continue?
save_password = Save Password
click_to_disconnect = Click to disconnect
click_to_connect = Click to connect

n_wireless_devices = {0} wireless device(s)
sms_total_count = {0} Total
login_pwd = Password
device_led = Led
data_used = {0} Used
data_total = {0} Total
time_used = {0} Used
time_total = {0} Hour(s) Total
roaming = In Roaming
connect_when_auto_check = When automatically connected to the Internet
connect_allow_roaming = Allowed to roam
connect_mode = Connection Mode

device_led_info = Turn on or turn off the device LED
about = About
modify_need_login = When the changes are complete, you need to login again
sms_messaging = Messaging
sms_location = Location
sms_device = Device
sms_sim = SIM
sms_all = All
sms_tap_select = Tap to select
confirm_number_sms_delete = Delete all message(s) of this number?
today = Today
yesterday = Yesterday
sms_n_selected = {0} Selected
send_fail = Send failed
ssid_type = SSID Type
security_open_info = Wi-Fi password is not set, there is the risk of being stolen by others.
mode_title = Mode Remind
mode_alert_info = The current model does not support this feature, please go to the PC WebUI and switch the mode to Wireless Broadband.
replace_sim_card = Please replace a new SIM Card
input_puk = Please input PUK
input_new_pin = Please input new PIN
input_confirm_pin = Please confirm your PIN
traffic_adjust = Data Calibrate
traffic_setting = Data Management
adjust_used_time = Used Time
adjust_used_data = Used Data

alert_time_info = When reached {0} hour(s) to remind me
alert_data_info = When reached {0} to remind me
traffic_off = Data settings are closed
traffic_off_detail = According to data or data time limit, to avoid high fee data
used_title = Used
left_title = Left
package_title = Plan
sim_undetected_info = לא הוכנס סים
modify_device_name = Modify Device Name
ota_update_new_version = Update Now
ota_new_version_num = New Software Version
ota_current_version = Current Software Version
###小终端wording结束##############

####Ethernet
net_mode = Current access
ethernet_access = Ethernet access
wifi_access = WLAN access
3g_access = WWAN access
ethernet_settings = Ethernet Settings
ethernet_dial_mode = Dial Mode
static_ip_address = IP Address
static_subnet_mask = Subnet Mask
static_gateway = Gateway
static_prefer_dns = Prefer DNS
static_standby_dns = Standby DNS
static_username = User Name
static_password = סיסמה
ethernet_mode_pppoe = PPPoE
ethernet_mode_static = Static
ethernet_mode_dhcp = DHCP
eth_connect_status = Connection Status
eth_auto_dial = Auto Connection
no_eth_insert = No Ethernet port insert!
pppoe_save_info = Save User Information
ethernet_info = Ethernet Information
ethernet_ip_address = Ethernet IP Address
ethernet_subnet_mask = Ethernet Subnet Mask
ethernet_gateway = Ethernet Gateway
ethernet_prefer_dns = Ethernet Prefer DNS
ethernet_standby_dns = Ethernet Standby DNS
rj45_wan = Enable
rj45_lan = Disable
rj45mode_switch = Cable Broadband
ethernet_mode_auto = AUTO
ethernet_mode_lan_only = Lan Only
eth_curr_mode = Current Mode
cable_mode = Cable mode
rj45_notes_auto = AUTO: The device works as WAN/LAN interface adaptive mode，it decide the ethernet interface should work as WAN interface or LAN interface according the manner through which the device connect with network outside. <br/>When ethernet interface work as WAN interface, and PPPoE manner, user need to fill up the username and password information to get internet service. <br/>When ethernet interface work as WAN interface, and the operator's network can allocate the effective IP address automatically as a DHCP Server, the device can connect internet automatically, no parameter need. In fact, the device work as DHCP Client, and get IP from operator's network.<br/>PS: If the device connect internet by ethernet interface, it will close the wireless connection.  So, if user want to return to wireless connection, he need to disconnect the ethernet connection, or set the ethernet interface work as LAN only mode.
rj45_notes_dhcp = Ethernet interface work as WAN mode. The device will work as a DHCP Client, and get the effective IP address from operator's network, and connect to internet.
rj45_notes_static = Static: Ethernet interface work as WAN mode. User has to input the IP address and gateway, DNS information manually, these information should be got from operator.User can access internet by fixed IP address.
rj45_notes_pppoe = PPPoE: Ethernet interface work as WAN mode. User need to input the username and password of PPPoE, and connect to internet.
rj45_notes_lan = LAN only: Ethernet interface work as LAN mode. The PC and laptop connect with the device by this LAN interface act as the same with the Wi-Fi client connect with the device,  all of them works in a local network. The device connect internet by wireless connection, not by ethernet interface.
change_rj45mode_alert = if you change the Dial Mode, you must plug cable again to effect, continue?

privacy_policy=תנאי שימוש
privacy_policy_note_1=By continuing to use this device, you indicate that you have read and agree to the following content:
privacy_policy_note_2=In order to provide better service, ZTE software requires access to your device''s unique identifier (IMEI/SN), system and application versions. ZTE may use these data to inform you about software updates and install them and improve user experience as our legitimate interest. Note that ZTE will not use these data for the purposes of personally identifying you.
privacy_policy_note_3=To understand better about our privacy policy, please read: 
privacy_policy_url=<a href="http://www.ztedevices.com/en/Privacy-Policy" target="_blank" >http://www.ztedevices.com/en/Privacy-Policy</a>. And you may send an email to Privacy@zte.com.cn to contact us.

finish = אני מאשר